JetsMunt Turbines Spain

 

 

 

 

Jets Munt Turbinen

 

Höchste Präzision und modernste Elektronik aus Spanien


JetsMunt M70XBL

 

Specifications:

Nominal thrust: 70N / (15,8 Lb.) at 172.000 RPM

Idle thrust: 2.8N (0.6 Lb.) at 50.000 RPM

Diameter: 75mm (3”) Length: 185mm (7.28”)

Engine weight: 676g (1,5lb)

Installed weight: 832g (1,83lb)

Fuel: Kerosene/Diesel + 4% oil

Fuel consumption: 200g/min @ 70N; 155g/min @ 50N;109g/min @ 30N

Starting mode: Direct Kerosene

 

Thinking in a 45N, or 50N or 60N or 65N engine? Why not all in one? Our new M70 combines the size and weight of a 44 engine but with the power adjustable to 70N, so one engine fits all sizes. Thanks to our the new FlexPower software, the engine can be adjusted to any output power from 30N to 70N in seconds, while keeping all the features of his big brothers, Brushless starter, brushless pumps, Bus ECU, Restart, and telemetry.

Includes engine and all ancillary accessories needed to run the engine, except the battery. Recomended LiPo 7,4v 2000mAh.


JetsMunt M100XBL

Specifications:

Nominal thrust: 100N at 152.000 RPM

Idle thrust: 4N

Idle RPM: 42,000

Diameter: 90mm (3.5”)

Engine weight: 985g (2.2lb)

Installed weight: 1,100g (2,4lb)

Fuel: Kerosene/Diesel + 3% – 5% oil

Fuel comsumption: 280g/min

Start mode: Direct Kerosene

 

Our M100 is the engine of choice for the 2 meter class of sport models. 100N packed in a small, lightweight body. The successful M100 engine was the first to receive our new electronic system. Sensors and valves are installed inside the motor, simplifying installation.

Starter and fuel pump motors are brushless, an industry first, only in JetsMunt! The engine has only one fuel input directly from the pump, and a 3-wire electrical connection to the ecu that carries the battery power and a bidirectional digital bus. All measures and data from the engine are transmitted to the ecu in digital data format, using a high speed proprietary protocol specially developed for this application. The bus design allow a distance up to 15 meters from engine to ecu while keeping the generated noise by the bus to a very low level to not affect other devices nor to be affected by them. Includes engine and all ancillary accessories needed to run the engine, except the battery. Recomended LiPo 7,4v 2500mAh.